Warning!

Are your sure you would like to delete this favorited item from your dashboard?

Specifying Transit

 

 

 

 

 

The Modular Panel with Raceway supports the transit element program. Can provide power pass-through and power access capabilities.

View Pricing


The Modular Panel without Raceway supports the transit element program and allows for power pass-through but not for power access.

View Pricing


The Super Panel with Raceway is made up of one 36" high base panel frame and Add-On Modules and allows for power pass-through and power access capabilities.

View Pricing


The Super Panel without Raceway is made up of one 36" high base panel frame and Add-On Modules and allows for power pass-through but not power access capabilities.

View Pricing


The Panel Raceway is an electrical conduit that may be added to panels previously specified without a raceway.

View Pricing


The Door Panel allows for door applications within the panel environment but does not allow for power pass-through or power access.

View Pricing


One 6" Add-On Module may be added to the top of any panel but cannot support overhead storage.

View Pricing


The Add-On Module – 15" high can be added to the top of any transit panel and accepts the full range of transit elements.

View Pricing


The Add-On Module – TPM42 is required when added to a 42" high transit Modular Panel (TPM or TPMN) only. This module also accepts the full range of transit elements.

View Pricing


The Add-On Module – 30" High can be added to the top of any transit panel and is designed to accept 30" Glazed (TGS, TGD) and Open (TGN) Elements.

View Pricing


The Add-On Module – Lay-In can be added to the top of any transit panel and accepts a limited range of transit elements.

View Pricing


The Privacy Screen – is a translucent panel-mounted, sliding partition that may be mounted to panels.

View Pricing


The Bridge is a tackable space divider which can be mounted in an on- or off-module position within a panel environment.

View Pricing


The Panel T provides an alternative to a panel end trim and acts as a secondary panel support.

View Pricing


The Divisional Screen attaches to any transit Panel on-module or off-module. Provides visual space division and accommodates a variety of accessories.

View Pricing


The Standard Thin Panel connects both on- or off-module to transit Panels or onmodule to Lyft Thin Panels and Screens, providing space division. The Standard Thin Panel's mid rail accommodates worksurface connection and support.

View Pricing


The Monolithic Thin Panel is designed to provide space division when linked to another panel or as a freestanding screen.

View Pricing


The Thin Panel Stabilizer Foot provides stability to Lyft Thin Panels beyond an adjacent worksurface or panel connection.

View Pricing


Add-On Screen – Translucent provides a casual alternative solution to increase panel height and visual privacy.

View Pricing


The Universal Connector attaches anywhere along the horizontal rails of two perpendicular panels to create off-module connections.

View Pricing


The Two-Way 45° panel connection creates a full-height connection between two panels that join at a 45° angle.

View Pricing


The Two-Way 90° Panel Connection creates a full-height connection between two panels that join at a 90° angle.

View Pricing


The Three-Way 180° Panel Connection creates a full-height connection between three panels where two panels are connected side-by-side at a 180° angle and the third meets them at a 90° angle.

View Pricing


The Four-Way Panel Connection creates a full-height connection between four panels which are connected at 90° angles.

View Pricing


The Intermediate Two-Way 90° Panel Connection creates an intermediate-height connection between two panels that join at a 90° angle.

View Pricing


The Intermediate Three-Way 180° Panel Connection creates a full height connection between three panels where two panels are connected side-by-side at a 180° angle, and the third meets them at a 90° angle.

View Pricing


The Full-Height Panel Spacer creates and covers a full-height space between two panels which are connected side-by-side at 180°.

View Pricing


The Full-Height Spacer Cover is a full-height finishing treatment which covers the exposed structural portion of specific corner types.

View Pricing


The Intermediate Panel Spacer creates and covers an intermediate-height space between two panels which are connected side-by-side at 180°.

View Pricing


The Intermediate Spacer Cover is an intermediate-height finishing treatment which covers the exposed structural portion of specific corner types.

View Pricing


The End Trim extends the full height of a panel to provide a finished covering for the end of the panel.

View Pricing


The Intermediate Trim provides a finished covering to the exposed portions of the panel at panel connections.

View Pricing


Top Trim is a finishing treatment which covers the top horizontal rail of the panel.

View Pricing


The Four-Way 90 Panel Connection – No Cap creates a full-height connection between four panels which are connected at 90° angles. This connection does not include a corner cap.

View Pricing


The Wall Adapter connects a panel to a fixed wall or column.

View Pricing


The Mid Run 90° On-Module Connector/Spacer creates a finished full height 90° mid run connection at the junction between a Lyft Thin Panel and two transit Panels aligned at 180° (three-way connection) or two Lyft Thin Panels aligned at 180° and two transit Panels aligned at 180° (four-way connection).

View Pricing


The End Run 90° Connector/Spacer creates a finished full height 90° angle end run connection between a Lyft Thin Panel and a transit Panel (two-way connection) or two Lyft Thin Panels and a transit Panel (three-way connection).

View Pricing


The 90° Thin Panel Connector creates a full height 90° connection between two Lyft Thin Panels.

View Pricing


Thin Panel End Trim finishes the full panel end height at all exposed corner and end run locations.

View Pricing

Thin Panel Intermediate Trim finishes exposed portions of Lyft Thin Panels where a full end trim is not required.

View Pricing


The Acoustic Element is a fabric-wrapped element with acoustic properties.

View Pricing


The Tackable Element is a fabric-wrapped tackable “bulletin board” with limited acoustic properties.

View Pricing


The Access Door Element snaps into place to provide hinged user access to power and communications outlets at worksurface height within the panel.

View Pricing


Power/Communications Elements provide access to Raceway Boxes (ERB) for facemounted power/communication plug-ins. Elements are available for power or power and communication access.

View Pricing


Wood Power/Communications Elements provide access to Raceway Boxes (ERB) for face-mounted power/communication plug- ins. Elements are available for power or power and communication access.

View Pricing


The Glazed Element finishes both sides of the panel and is made of a single or double pane of tempered glass.

View Pricing


Architectural Glazed Elements finish both sides of the panel and are available with single or double panes of tempered glass in a variety of finish patterns.

View Pricing


The Accessory Element is designed to support Personal Organizers (PAX) and to facilitate organization of the workspace.

View Pricing


The Whiteboard Element serves as an erasable message board, providing a clean frameless design profile with an optional tray.

View Pricing


The Open Element finishes both sides of the panel to create a framed opening.

View Pricing


The Perforated Element allows passive air circulation between adjacent work areas.

View Pricing


Architectural Elements are available with a Perforated or Embossed metal surface.

View Pricing


The Laminate Element provides a low pressure laminate finish to the panel surface.

View Pricing


The Wood Element provides a wood finish for the panel surface.

View Pricing


The Baseboard Elements provide an attractive finish for the baseboard level of the panel.

View Pricing


The Rectangular Worksurface is a straight worksurface having square corners designed for use within a panel-mounted, semi-supported or freestanding environment.

View Pricing


The Straight transition Worksurface is a rectangular worksurface that transitions from one depth to another.

View Pricing


The Outside Radius Worksurface is a worksurface which provides a rounded edge on one corner of a rectangular worksurface.

View Pricing


The Standard Corner Worksurface is a panel-mounted surface for use in a 90° corner. This worksurface is ideal for the application of a keyboard tray.

View Pricing


The Standard Radius Corner is a panel-mounted corner worksurface which provides a curved edge on the user edge.

View Pricing


The Split Radius Corner Worksurface with Keyboard Support provides a wide keyboard tray and mouse support solution in panel-mounted environments.

View Pricing


The Split Corner Worksurface with Keyboard Support provides a large sit-stand keyboard tray and mouse support solution in panel-mounted environments.

View Pricing


The Radius Corner Worksurface with Return is a rectangular surface combined with a transitional corner which can be connected to a surface of a different depth within the panel environment.

View Pricing


The EDP Worksurface is a panel-mounted worksurface. It has an angled or curved end that is designed to be used adjacent to a Corner Worksurface to create a recessed area for a keyboard support or to provide a cockpit area.

View Pricing


The Bullet Top Worksurface is designed to accommodate multiple guests on three sides in a semi-supported, panel-mounted or freestanding application.

View Pricing


The P-Top Worksurface combines the features of a rectangular top with a round multiple guest end for meetings. This product can be used in a panel-mounted, semisupported, or freestanding environment.

View Pricing


The Modified P-Top dual depth worksurface combines the features of a rectangular top with a curved end ideal for conferencing. This item can be panel-mounted, semi–supported or used in freestanding applications.

View Pricing


The D-Top Worksurface provides a conferencing area at the end of two parallel panelmounted, semi-supported or freestanding worksurfaces.

View Pricing


The Tapered Worksurface is a rectangular worksurface with a transition in depth that can be mounted on- or off-module.

View Pricing


The Standard Corner Worksurface (xm) is a panel-mounted surface for use in a 90° corner. This worksurface is ideal for the application of a keyboard tray.

View Pricing


The Radius Corner Worksurface with Return (xm) is a transitional corner which provides a dedicated corner for a computer monitor and a keyboard.

View Pricing


The Guest Corner Worksurface offers a deep corner for the placement of a computer monitor as well as a guest area at the opposite end.

View Pricing


The Flask Worksurface is an aesthetic alternative to the Bullet Top Worksurface (TWBS).

View Pricing


The Straight Countertop may be mounted off-module alone or together with other countertop types to create transaction surfaces as required.

View Pricing


The Bullet Countertop may be mounted off-module alone or together with other countertop types to create transaction surfaces as required. The curved end finishes the run.

View Pricing


The Double Bullet Countertop mounts off-module and is for use as a stand-alone transaction surface.

View Pricing


The Angled Countertop mounts off-module and can be used alone or together with other countertop types to create transaction surfaces for Two-Way 90° panel connection configurations.

View Pricing


The On-Module Cantilever is applied on-module (in the panel hingeway) to support worksurfaces. It fits flush beneath panel-mounted worksurfaces to allow knee clearance. It can be applied in a right hand, left hand or shared position.

View Pricing


An Altos On-Module Cantilever is applied on-module (in the panel hingeway) to support worksurfaces. It fits flush beneath panel-mounted worksurfaces to allow knee clearance. It can be applied in a right hand, left hand or shared position.

View Pricing


The Off-Module Cantilever attaches anywhere along the panel horizontal rail to provide maximum lateral flexibility beneath worksurfaces.

View Pricing


The Panel Support Foot provides additional panel run support when attached to an Off-Module Cantilever.

View Pricing


An Off-Module Support Kit can be added to the Off-Module Cantilever to provide shared support, offset support or additional support at 90°.

View Pricing


The Flush End provides non-handed fully-enclosed height-adjustable support at the end of a run of panel-mounted worksurfaces, semi-supported worksurfaces, or with transit freestanding units.

View Pricing


The Fixed Height Gable is a non-handed support providing fully enclosed support at the end of a run of panel-mounted (on- or off-module) worksurfaces and Altos wall mounted worksurfaces.

View Pricing


The Fixed Height Metal Gable is a non-handed support providing fully enclosed support at the end of a run of panel-mounted (on- or off-module) worksurfaces.

View Pricing


The Pedestal Supporting Bracket in combination with a Pedestal provides a fully enclosed on-module support at the end of a run of transit panel-mounted worksurfaces.

View Pricing


The C-Leg provides non-handed, height-adjustable worksurface support within a panel-mounted, semi–supported or freestanding application.

View Pricing


The Open End is a non-handed, height-adjustable support. It provides support for semi-supported worksurfaces or freestanding tables.

View Pricing


The Semi-Suspended Monoleg provides height adjustable support to the free end of a panel-mounted or semi-supported worksurface such as a Bullet Top, D-Top, Cove or PTop.

View Pricing


The Semi-Suspended Post provides height-adjustable secondary support at the front of a worksurface 36" or deeper.

View Pricing


The xm Post Leg non handed height adjustable secondary support used at the front of a worksurface as an aesthetic alternative to the Semi-Suspended Post Leg (TLSP).

View Pricing


On-Module Corner Brackets provide on-module worksurface support in a corner or at the end of a worksurface. It can be applied in a right or left hand position.

View Pricing


Altos On-Module Corner Brackets provide on-module worksurface support in a corner or at the end of a worksurface. It can be applied in a right or left hand position.

View Pricing


The Flush Plate ensures alignment between adjacent worksurfaces and is used in conjunction with other worksurface supports.

View Pricing


The Modesty Panel provides seated privacy to freestanding and semi-supported worksurfaces. It has an integral wire management tray and allows easy wire flow.

View Pricing


The FS Modesty Panel is used with c-leg or flush end supports and provides structural support and visual privacy to transit Freestanding units.

View Pricing


Mounting Kits are used to retrofit supports used in freestanding or panel-mounted applications.

View Pricing


Fixed Height Thin Panel Mount Brackets mount to the mid rail of Lyft Standard and Segmented Thin Panels, providing worksurface support.

View Pricing


The Adjustable Height Thin Panel Mount Bracket mounts to Lyft Standard and Segmented Thin Panels, providing worksurface support with a height-adjustment range of 26" to 32".

View Pricing


The End Gable connects to Lyft Thin Panels and worksurfaces to provide structural support at the end of a worksurface run.

View Pricing


The Worksurface Supporting Pedestal Kit in combination with a Pedestal provides structural support when mounted to worksurfaces and Lyft Thin Panels.

View Pricing


The Freestanding Rectangular Desk (Flush Ends) can stand alone or be used in combination with other freestanding units and can migrate between freestanding and panel applications.

View Pricing


The Freestanding Rectangular Desk (C-Legs) can stand alone or be used in combination with other freestanding units and can migrate between freestanding and panel applications.

View Pricing


The Rectangular Return (Flush End/C-Leg) is a semi-supported unit that may be used

View Pricing


The Rectangular Return (C-Legs) is a semi-supported unit. It is used as a return or that may be end of a run of desks and can migrate between freestanding and panel applications.

View Pricing


The EDP Return (Flush End) is a semi-supported unit that may be used as a return or at the end of a run of units and can migrate between freestanding and panel applications.

View Pricing


The Rectangular Bridge is used to connect two adjacent semi-supported units and can migrate between freestanding and panel applications.

View Pricing


The Bullet Return is a semi-supported unit that may be used as a return and can migrate between freestanding and panel applications.

View Pricing


The Radius Corner with Return (Flush End/C-Leg) is a semi-supported that may be used in conjunction with returns or bridge units and can migrate between freestanding and panel applications.

View Pricing


The Corner Linking Worksurface connects units in 90° applications and must be connected to other freestanding or semi supported units of the same depth.

View Pricing


The Overhead Cabinet is a lockable storage unit that mounts along the horizontal rail.

View Pricing


The Shelf provides open storage that mounts anywhere along the horizontal panel rail.

View Pricing


The Corner Shelf mounts along panel horizontal rails within a 90° panel connection to provide open, corner storage.

View Pricing


The Book Organizer can be applied to the Shelf (TSS), Corner Shelf (TSC1) or within the Overhead Cabinet (TSF) to separate books, binders and other items.

View Pricing


The Organizer Rail mounts along the horizontal panel rail and over Acoustic Element (THA) or Tackable Element (TTA) to provide off-module support for Personal Organizers (PAX).

View Pricing


The Table Rail mounts to freestanding or semi supported worksurface and allows for the application of various desk accessories.

View Pricing


The Monitor Screen mounts anywhere along the Table Rail (ACTR) and conceals wires connected to the back of a monitor.

View Pricing


The Table Screen mounts anywhere along the Table Rail to provides a tackable surface as well as visual privacy.

View Pricing


The Translucent Table Screen mounts anywhere along the Table Rail (ACTR) to provides visual and territorial privacy.

View Pricing


The Curved Shelf mounts anywhere along the Table Rail (ACTR) and rests on the worksurface.

View Pricing


The Pedestal allows for full depth storage beneath the worksurface and is available in three drawer configurations.

View Pricing


Pedestal Accessories are organizational tools for use in transit Pedestals.

View Pricing


Lateral Files are available in a variety of heights to provide high density filing and organized storage.

View Pricing


Lateral File Accessories are organizational tools for use in Lateral Files.

View Pricing


Storage Cabinets are available in a variety of heights with or without adjustable shelves to provide enclosed storage.

View Pricing


Wardrobe Cabinets are available in divided or undivided configurations to provide an enclosed space for garments and other items.

View Pricing


Storage and Wardrobe Cabinet Accessories are optional organizational tools for use in Storage and Wardrobe Cabinets (TS, TSW).

View Pricing


The Universal Light is magnetically mounted anywhere along the underside of the Shelf (TSS), Corner Shelf (TSC1), Overhead Cabinet (TSF) and provides task lighting for the worksurface.

View Pricing


The Utility Light is clip-mounted to the underside of the Overhead Cabinet (TSF). It provides movable side-to-side task lighting for the worksurface.

View Pricing


The Base Feed is hard-wired to the building power supply and enters in the base opening of the panel and feeds power up into the panel raceway only.

View Pricing


The Split Base Feed is hard-wired to the building power supply in two places and enters in the base opening of the panel and feeds power up into the panel raceway only.

View Pricing


The Plug-In Base Feed can be plugged into the building power supply and enters in the base opening of the panel and feeds power up into the panel raceway only.

View Pricing


The Power Pole includes an electrical harness and a junction box and routes power or communications directly from the building supply in the ceiling to the raceway level of the panel.

View Pricing


The Power Pole (No Harness) does not include electrical harnesses or a junction box, but provides a safe enclosure in which to route power or communications from the ceiling to the top of the panel.

View Pricing


The Pole Divider enables the separation of electrical harnesses and communication cables within a Power Pole.

View Pricing


The High Capacity Power Pole includes electrical harnesses and a junction box. It provides a larger route than the Power Pole (EPT) for power and communications from the ceiling to the raceway level of the panel.

View Pricing


The High Capacity Power Pole (No Harness) does not include electrical harnesses or a junction box. It provides a larger route than the Power Pole (No Harness) (EPT) for power and communications from the ceiling to the top of the panel.

View Pricing


The Power Pole Harness and junction box kit is designed for use with Power Poles (No Harness) (EPT) and High Capacity Power Poles (No Harness) (EPHT).

View Pricing


The Receptacle Harness routes power to outlets in the panel raceway to be accessed through access elements and also carries power through the raceway to adjacent panels.

View Pricing


The Quadrex Receptacle Harness routes power to outlets in 42", 48", 54" and 60" wide panel raceways and also carries power through the raceway to adjacent panels. Outlets are accessed through access elements.

View Pricing


The Panel Pass-Through Harness routes power at the raceway level to adjacent panels but does not connect to outlets. This item is for use with panels which do not require worksurface-height power access.

View Pricing


The No Raceway Jumper is designed specifically for panels without a raceway. It routes power though the base of the panel.

View Pricing


The Four-Way Connector connects to receptacle or pass-through harness to route power in three directions for distribution between two to four adjacent panels. Outlets cannot be connected to the Four-Way Connector.

View Pricing


This Off-Module Jumper is used when panels are connected off-module using a Universal Connector (TUC) and routes power externally from the base of one panel into the base of another.

View Pricing


The M-Clip attaches behind element to horizontal rail to route voice and data cables.

View Pricing


Outlets provide access to power at worksurface height through the access element and attach to compatible receptacle harness.

View Pricing


Outlets (Separate Neutral) provide access to power at worksurface height through the access door using the 8N (Separate Neutral) wiring system only.

View Pricing


Outlets (Dual Isolated) provide access to power at worksurface height through the access door using the 8K (Dual Isolated) wiring system only.

View Pricing


The Surge Suppressor attaches to an isolated circuit as a standard duplex outlet to provides protection (up to 6000 volts) to sensitive equipment.

View Pricing


The Outlet Knockout Cover covers an outlet opening in the receptacle rail when the outlet has been removed for reconfiguration purposes.

View Pricing


Raceway boxes are available for single – and double –sided applications. They provide face mounted access to power/communications at various heights and must be specified with Power/Communication Elements (TPC).

View Pricing


Raceway boxes are available for single– and double–sided applications. They provide face mounted access to power/communications at various heights and must be specified with Power/Communication Elements (TPC).

View Pricing


Raceway boxes are available for single– and double–sided applications. They provide face mounted access to power/communications at various heights and must be specified with Power/Communication Elements (TPC).

View Pricing


The Voice Data Module installs over the Communication duct opening in the panel and provides access to communication connectors at worksurface height.

View Pricing


The Voice Data adapter is used where communication cables enter from the top of the panel and the VDM is hanging upside down.

View Pricing


The Voice/ Data Faceplate Adapter allows the installation of face mounted modular furniture voice/data faceplates in decora faceplate sized cut-outs.

View Pricing


The Access Door VDM Plates allow voice and data outlets to be mounted on the face of the transit Access Door Elements (TADS/TADD).

View Pricing


Chicago Corner Ducts are required by code in chicago and enclose electrical cables between corner panel connections in raceway panels.

View Pricing


The Retractable Power Center is field installed and slides up through the worksurface to provide easy access to outlets concealed beneath the surface. It retracts to allow use of entire worksurface.

View Pricing


The Worksurface Tray is attached to the underside of the straight edge of a worksurface and facilitates wire management along semi-suspended worksurfaces.

View Pricing


The Panel Tray attaches to the face of the panel to provide casual wire management of data and communication wires.

View Pricing


The Bridge Tray provides wire management to one or both sides of the bridge.

View Pricing


Base Cable Clips attach to the base rail of Lyft Thin Panels to support casual wire routing.

View Pricing


Provides access to power at worksurface height. Outlet boxes can be mounted onto a Panel (accessible through an Access Door or an Element), or mounted to the edge of a desk or table.

View Pricing


Routes power between Outlet Boxes in panel access areas and also carries power through the adjacent panel

View Pricing


The Input Power Cable brings power from the building to the panel. It can be installed in the base opening of the panel to feed power up to the panel raceway or worksurface level. It can also be brought down from the ceiling to the workstation via a power plate.

View Pricing

The Voice & Data Box is designed to bring access to communications and data to the user.

View Pricing

International Lighting Electrics Communications Basics

International Lighting Electrics Communications Application Guidelines



The Voice & Data Outlets are inserted into the Voice & Data Box (VVD).

View Pricing


The Distribution Block redirects power distribution. The Cover Cap is a safety cover for Outlet Boxes and Distribution Blocks. The Desk-Mounting Clips attach an Outlet Box to a desk or worksurface.

View Pricing


Mounting Brackets attach to the Outlet Box (VED) or the Voice & Data Box (VVD) to the panel.

View Pricing


International Power/Communication Elements provide access to face-mounted power/communication plug-in. Elements are available for power only or power and communication access.

View Pricing