Warning!

Are your sure you would like to delete this favorited item from your dashboard?

Specifying Leverage


We continue making improvements to the new pricing module and welcome your feedback.

 

The Standard Panel reduces panel cost if a wide variety of element types are not required.

View Pricing


The Semi-Segmented Panel permits use of a wide variety of functional, glazed and architectural elements.

View Pricing


The Segmented Panel permits use of all Leverage element types. The lowest segmented rail is at a height of 21".

View Pricing


The Segmented Panel permits use of all Leverage element types. The lowest segmented rail is at a height of 30".

View Pricing


The Panel Rail converts a Panel – Standard into a Semi-Segmented or Segmented panel type in one easy step to maximize the use of all Leverage element products.

View Pricing


The Panel Add-On can be applied to the top of any panel type to increase the height of a panel.

View Pricing


The Panel Add-On to KP_30 can be applied to the top of a 30" high panel only to increase the height of a panel.

View Pricing


The Panel Add-On – Single Glass can be applied to the top of two panels as an add-on providing uninterrupted glass spans of up to 8' in width.

View Pricing


The Panel Add-On – Double Glass can be applied to the top of two panels as an add-on providing uninterrupted glass spans of up to 8' in width.

View Pricing


Panel Add-On to KP_30 – Single Glass can be applied to the top of two 30" high panels as an add-on providing uninterrupted glass spans of up to 8' in width.

View Pricing


Panel Add-On to KP_30 – Double Glass can be applied to the top of two 30" high panels as an add-on providing uninterrupted glass spans of up to 8' in width.

View Pricing


The Panel Add-On Screen – Glass is added on top of Panels to provide a lighter, frameless alternative to Panel Add-Ons.

View Pricing


The Panel Add-On with Thick Top Trim Screen – Glass is added on top of Panels to provide a lighter, frameless alternative to Panel Add-Ons.

View Pricing


The Door Panel allows for door applications within the panel environment, however, does not allow for power pass-through or power access. The Door Panel works with Conventional and Universal Panel Frame Styles.

View Pricing


The Privacy Screen is a lightweight, translucent panel-mounted, sliding partition that works with Conventional and Universal Panel Frame Styles.

View Pricing


The Panel Rail Mounting Kit is used to add 42" segmentation for 51" and 66" high panels.

View Pricing


The Slim Gasket is designed to conceal the slots between panels.

View Pricing


The Wide Gasket is designed to conceal the slots between panels.

View Pricing


The Standard Thin Panel connects both on- or off-module to Leverage Panels or onmodule to Lyft Thin Panels and Screens, providing space division. The Standard Thin Panel's mid rail accommodates worksurface connection and support.

View Pricing


The Monolithic Thin Panel is designed to provide space division when linked to another panel or as a freestanding screen.

View Pricing


The Thin Panel Stabilizer Foot provides stability to Lyft Thin Panels beyond an adjacent worksurface or panel connection.

View Pricing


The Translucent Add-On Screen provides a casual alternative solution to increase panel height and visual privacy.

View Pricing


The 90° two-way connector creates and covers a full-height connection between two panels that are jointed at a 90° angle.

View Pricing


The 120° two-way connector creates and covers a full-height connection between two panels that are joined at a 120° angle.

View Pricing


The 180° two-way connector creates and covers a full-height space between two panels that are connected side-by-side at a 180° angle.

View Pricing


The 120° three-way connector creates and covers a full-height connection between three panels that are joined at 120° angles.

View Pricing


The three-way corner connector creates and covers a full-height connection between three panels that are joined at a 180° angle (side by side and the third panel meets at a 90° angle).

View Pricing


The four-way corner connector creates and covers a full-height connection between four panels that are joined at 90° angles.

View Pricing


The 90° two-way intermediate connector creates and covers an intermediate-height connection between two panels that are joined at a 90° angle.

View Pricing


The 120° two-way intermediate connector creates and covers an intermediate-height connection between two panels that are joined at 120° angle.

View Pricing


The 180° two-way intermediate connector creates and covers an intermediate-height connection between two panels that are connected side-by-side at a 180° angle.

View Pricing


The 120° three-way intermediate connector creates and covers a full-height connection between three panels that are joined at 120° angles.

View Pricing


The three-way intermediate connector creates and covers an intermediate-height connection between three panels that are joined at a 180° angle (side by side and the third panel meets at a 90° angle).

View Pricing


The four-way intermediate connector creates and covers an intermediate-height connection between four panels that are joined at 90° angles.

View Pricing


The Panel End Trim extends the full height of a panel or a panel connector to provide a finished covering.

View Pricing


The Intermediate Panel End Trim provides a finished covering to the exposed portions of the panel at panel connections.

View Pricing


Top Trim is a finishing treatment which covers the top horizontal rail of the panel.

View Pricing


Continuous Top Trim spans the horizontal rails of two panels to provide a continuous clean aesthetic.

View Pricing


Thick Top Trim is a finishing treatment which covers the top horizontal rail of the panel.

View Pricing


Continuous Thick Top Trim spans the horizontal rails of two panels to provide a continuous clean aesthetic.

View Pricing


The Panel Wall Adapter connects a panel to a fixed wall or column.

View Pricing


The Panel-to-Panel Adapter provides the ability to create an off-module 90° connection.

View Pricing


The Two-Way Connector 90° – Wood creates and covers a full-height connection between two panels that are joint at a 90° angle.

View Pricing


The 180° wood two-way connector creates and covers a full-height space between two panels that are connected side-by-side at a 180° angle.

View Pricing


The wood three-way connector creates and covers a full-height connection between three panels that are joint at a 180° angle (side by side and the third panel meets at a 90° angle).

View Pricing


The wood four-way connector creates and covers a full-height connection between four panels that are joined at 90° angles.

View Pricing


The 90° wood two-way connector creates and covers an intermediate-height connection between two panels that are joined at a 90° angle.

View Pricing


The 180° wood two-way connector creates and covers an intermediate-height connection between two panels that are connected side-by-side at a 180° angle.

View Pricing


The wood three-way connector creates and covers an intermediate-height connection between three panels that are joined at a 180° angle (side by side and the third panel meets at a 90° angle).

View Pricing


The wood panel end trim extends the full height of a Panel or a Panel connector to provide a finished covering.

View Pricing


The wood intermediate panel end trim provides a finished covering to the exposed portions of the panel at panel connections.

View Pricing


The wood top trim is a finishing treatment which covers the top horizontal rail of the panel.

View Pricing


The Continuous Top Trim – Wood spans the horizontal rails of two panels to provide a continuous clean aesthetic.

View Pricing


Bracket is used when stacking a glass panel add-on above a 30" high panel in a two-way 90° corner.

View Pricing


Bracket is used when stacking a glass panel add-on above a 30" high panel in a two-way 120° corner.

View Pricing


Bracket is used when stacking a glass panel add-on above a 30" high panel in a two-way 180° corner.

View Pricing


Bracket is used when stacking a glass panel add-ons above a 30" high panel in a three-way 90° corner.

View Pricing


Bracket is used when stacking a glass panel add-ons above a 30" high panel in a three-way 120° corner.

View Pricing


Bracket is used when stacking a glass panel add-ons above a 30" high panel in a four-way 90° corner.

View Pricing


Bracket is used to align two glass panel add-ons in same height conditions.

View Pricing


Bracket is used to align two glass panel add-ons in change of height conditions.

View Pricing


The Mid Run 90° On-Module Connector/Spacer creates a finished full height 90° mid run connection at the junction between a Lyft Thin Panel and two Leverage Panels aligned at 180° (three-way connection) or two Lyft Thin Panels aligned at 180° and two Leverage Panels aligned at 180° (four-way connection).

View Pricing


The End Run 90° Connector/Spacer creates a finished full height 90° angle end run connection between a Lyft Thin Panel and a Leverage Panel (two-way connection) or two Lyft Thin Panels and a Leverage Panel (three-way connection).

View Pricing


The Off-Module 90° Connector enables a Lyft Thin Panel to be connected off-module to a Leverage Panel.

View Pricing


The 90° Thin Panel Connector creates a full-height 90° connection between two Lyft Thin Panels.

View Pricing


Thin Panel End Trim finishes the full panel end height at all exposed corner and end run locations.

View Pricing


Thin Panel Intermediate Trim finishes exposed portions of Lyft Thin Panels where a full end trim is not required.

View Pricing


The Acoustic Element is a fabric-wrapped tackable element with acoustical properties.

View Pricing


The Acoustic Element – Floor-Flush is a fabric wrapped tackable element with acoustical properties that extends to the floor, covering the base of the panel frame.

View Pricing


The Metal Element provides a metal finish for the panel surface.

View Pricing


The Metal Element – Floor-Flush is an element that extends to the floor covering the base of the panel frame

View Pricing


The Wood Element provides a wood finish for the panel surface.

View Pricing


The Wood Element – Floor-Flush is an element that extends to the floor covering the base of the panel frame.

View Pricing


The Laminate Element provides a laminate finish for the panel surface.

View Pricing


The Laminate Element – Floor-Flush is an element that extends to the floor covering the base of the panel frame.

View Pricing


The Baseboard Element finishes the base of a Floor-Flush Panel where Floor-Flush Elements are not applied.

View Pricing


The Acoustic Power/Communication Element provides face mounted access to power and/or communication outlets.

View Pricing


The Monolithic Acoustic Power/Communication Element provides face mounted access to power and/or communication.

View Pricing


The Metal Power/Communication Element provides face mounted access to power and/or communication.

View Pricing


The Metal Power/Communication Element – Floor-Flush provides face mounted access to power and/or communication.

View Pricing


The Monolithic Metal Element Power/Communication provides face mounted access to power and/or communication.

View Pricing


The Wood Power/Communication Element provides face mounted access to power and /or communication outlets.

View Pricing


The Wood Power/Communication Element – Floor-Flush provides face mounted access to power and/or communication.

View Pricing


The Monolithic Wood Element – Power/Communication provides face mounted access to power and/or communication.

View Pricing


The Laminate Element Power/Communication provides face mounted access to power and /or communication outlets.

View Pricing


The Laminate Power/Communication Element - Floor-Flush provides face mounted access to power and/or communication.

View Pricing


The Monolithic Laminate Element – Power/Communication provides face mounted access to power and/or communication.

View Pricing


The International Power/Communication Element provides face mounted access to power and/or communication outlets.

View Pricing


The Accessory Element is designed to support Personal Organizers (PAX) and to facilitate organization of the workplace.

View Pricing


The Whiteboard Element serves as an erasable message board, providing a clean frameless design profile with an optional tray.

View Pricing


The Glass Element is a single pane of tempered glass and depending on the glazing finish selected, provides various levels of visual access to adjacent work areas.

View Pricing


The Double Glass Element is made of double pane tempered glass.

View Pricing


The Architectural Glass Elements are single panes of tempered glass available in a variety of glass patterns.

View Pricing


The Double Architectural Glass Elements are double panes of tempered glass available in a variety of glazing patterns.

View Pricing


The Architectural Elements are embossed metal surfaces available in a variety of indented metal.

View Pricing


The Architectural Elements – Floor-Flush are embossed metal surfaces that extend to the floor, covering the base of the panel frame.

View Pricing


The Rectangular Worksurface is panel-mounted and provides a primary or secondary surface.

View Pricing


The EDP Worksurface is a panel-mounted worksurface with a straight or curved end to be used adjacent to a corner worksurface to create a recessed area for a keyboard support.

View Pricing


The Transition Worksurface is panel-mounted and provides an ideal secondary surface within a workstation.

View Pricing


The Concave Worksurface is a multi-purpose worksurface designed to be used in a variety of planning scenarios.

View Pricing


The Concave Bridge Worksurface is a multi-purpose wood worksurface designed to allow workstation configurations to have a uniform grain direction.

View Pricing


The Convex Worksurface is a multi-purpose worksurface which can be used in a variety of planning scenarios.

View Pricing


The Concave Transition Worksurface is a concave worksurface combined with a transitional corner which can be connected to a surface of a different depth within the panel environment.

View Pricing


The Convex Transition Worksurface is a rectangular worksurface with a transition in depth.

View Pricing


The Standard Corner Worksurface is a panel-mounted worksurface for use in 90° corners and is ideal for the application of a keyboard support.

View Pricing


The Standard Corner Worksurface is a panel-mounted 90° corner Wood worksurface designed to allow workstation configurations to have a uniform grain direction.

View Pricing


The Curved Corner Worksurface is a panel-mounted worksurface designed for use in a 90° corner application.

View Pricing


The Curved Corner Worksurface is a panel-mounted 90° corner Wood worksurface designed to allow workstation configurations to have a uniform grain direction.

View Pricing


The Split Radius Corner Worksurface is panel-mounted and provides an ergonomic, user-adjustable, large keyboard tray and mouse support.

View Pricing


The Radius Corner Worksurface with Return is a transitional corner which provides a dedicated corner for a computer monitor and keyboard and can be connected to surfaces of different depths within the panel environment.

View Pricing


The Radius Corner Worksurface with Return and Keyboard Support Surface provides a wide keyboard tray and mouse support solution within the panel environment.

View Pricing


The Extended Corner with Transition Return offers a deep corner for the placement of a computer monitor as well as a transition in depth at the opposite end.

View Pricing


The Standard Pentagon Worksurface is a panel-mounted worksurface for use in 120° corners and is available with a curved user edge or a straight user edge ideal for the application of keyboard supports.

View Pricing


The Extended Pentagon Worksurface is a panel-mounted worksurface for use in 120° corners.

View Pricing


The 120° Outside Corner Worksurface is a panel-mounted worksurface that is applied to the outside corner of two panels joined at 120° angles with worksurfaces on both sides.

View Pricing


The Rectangular Countertop mounts on top of a panel to provide a transaction surface.

View Pricing


The Convex Countertop mounts on top of a panel to provide a transaction surface.

View Pricing


The Radius Corner Worksurface with Return (with Flush End Gable) is a semi-supported worksurface designed to maximize worksurface space in confined areas.

View Pricing


The Radius Corner Worksurface with Return (with Monoleg) is a semi-supported worksurface designed to maximize worksurface space in confined areas.

View Pricing


The Extended Corner with Transition Return (with Monoleg) is a semi-supported worksurface which provides a deep corner as well as a guest area at the opposite end.

View Pricing


The Bullet Worksurface is a semi-suspended worksurface that mounts to the panel at one end and is supported by a monoleg at the other and is ideal for small meetings or team workstations.

View Pricing


The Curvilinear Bullet Top is an esthetic alternative to the Bullet Worksurface (KWBT). It is designed to accommodate multiple guests on three sides.

View Pricing


The Transaction Worksurface combines the function of a semi-supported rectangular worksurface with a conferencing surface.

View Pricing


The Rectangular Worksurface with Monoleg is a semi-supported worksurface that mounts to the panel at one end and is supported by a monoleg at the other. This worksurface is ideal for small meetings or team workstations.

View Pricing


The D-Top End Worksurface is semi-circular and mounts to the end of a panel run.

View Pricing


The Outside Corner Worksurface is a panel-mounted worksurface that is applied to the outside corner of two panels joined at a 90° angle.

View Pricing


The Outside Corner Worksurface is a panel-mounted wood worksurface that is applied to the outside corner of two panels joined at a 90° angle. Grain direction runs at 90° to provide uniform grain direction within a workstation.

View Pricing


The Peninsula Corner Worksurface is a semi-supported worksurface designed to provide a small meeting area at the end of a worksurface or the outside corner of two panels joined at a 90° angle.

View Pricing


The Peninsula Corner Worksurface is a semi-supported wood worksurface designed to provide a small meeting area at the end of a worksurface or the outside corner of two panels joined at a 90° angle. Grain direction runs at 90° to provide uniform grain direction within a workstation.

View Pricing


The Rectangular Worksurface (D-Style) provides a range of depths to support primary worksurface applications.

View Pricing


The Wedge Worksurface (D-Style) provides depth transition for primary worksurface applications.

View Pricing


The Extended Wedge Worksurface (D-Style) provides depth transition capable of aligning with a secondary worksurface.

View Pricing


The Wing Worksurface (D-Style) provides depth transition capable of aligning with a secondary worksurface.

View Pricing


The Transition Worksurface (D-Style) provides depth transition capable of aligning with one or two secondary worksurfaces.

View Pricing


The Guest Rectangular Worksurface (D-Style) is designed to accommodate multiple guests or used as a secondary worksurface.

View Pricing


The Fan Worksurface (D-Style) is designed to accommodate multiple guests or used as a secondary worksurface.

View Pricing


The Tapered Worksurface (D-Style) is designed to accommodate multiple guests or used as a secondary worksurface.

View Pricing


The Shared Wedge Worksurface (D-Style) provides depth transition for shared worksurface applications.

View Pricing


The Source Laminate Rectangular Worksurface is panel-mounted and provides a primary or secondary surface.

View Pricing


The Source Laminate Curved Corner Worksurface is a panel-mounted worksurface designed for use in a 90° corner application. The user edge of this worksurface is curved.

View Pricing


The Source Laminate Standard Corner Worksurface is a panel-mounted worksurface for use in 90° corners and worksurface is ideal for the application of a keyboard support.

View Pricing


The Source Laminate Transition Worksurface is a panel-mounted worksurface with a straight or curved end to be used adjacent to a corner worksurface to create a recessed area for a keyboard support.

View Pricing


The Source Laminate Rectangular Countertop mounts on top of a panel to provide a transaction surface.

View Pricing


The Handed Cantilever is an on-module primary worksurface support which can be used to support a single worksurface or provide shared worksurface support.

View Pricing


The C-Leg is a non-handed, on-module, fixed-height worksurface support.

View Pricing


The Intermediate C-Leg is a non-handed, off-module, fixed height worksurface support.

View Pricing


The Mid Gable – Laminate provides mid-span support to panel mounted worksurface.

View Pricing


The Mid Gable – Metal provides mid-span support to panel mounted worksurface.

View Pricing


The Mid Gable –Wood provides mid-span support to panel mounted worksurface.

View Pricing


The Corner Bracket is an on-module, panel-mounted bracket used as a secondary support for a worksurface.

View Pricing


The Flush Plates are designed to align adjacent worksurfaces and are used in conjunction with other worksurface supports.

View Pricing


The Structural Flush Plate is used in conjunction with other supports to maintain and provide structural support to freestanding worksurfaces.

View Pricing


The Worksurface Reinforcement Channel adds rigidity to worksurfaces.

View Pricing


The Flush End Gable – Wood is a non-handed, on-module primary support, used to provide full closure at the end of a worksurface run.

View Pricing


The Flush End Gable – Metal is a non-handed, on-module primary support, used to provide full closure at the end of a worksurface run.

View Pricing


The Flush End Gable – Laminate is a non-handed, on-module primary support, used to provide full closure at the end of a worksurface run.

View Pricing


The Pedestal Supporting Bracket in combination with a Pedestal provides a fully enclosed support at the end of a run of Leverage panel-mounted worksurfaces.

View Pricing


The xm Post Leg is a secondary support used to provide additional support at the front of a worksurface as an aesthetic alternative to the Semi-Suspended Post Leg (TLSP).

View Pricing


The Monoleg is a single, cylindrical support designed to be used in conjunction with panel-mounted supports to support semi-suspended worksurfaces.

View Pricing


The Slim Post Leg mounts under a worksurface in semi-supported and freestanding applications (restrictions apply).

View Pricing


The W/R/S Mounted Worksurface Brackets are off-module connectors that attach the worksurface to a horizontal rail.

View Pricing


The Worksurface-to-Tower Bracket Kit is used to support a worksurface by connecting it to a tower or locker.

View Pricing


The Height-Adjustable Worksurface-to-Tower Support is used to attach worksurfaces to storage.

View Pricing


The Low Credenza-to-Worksurface Support mounts to the underside of a worksurface and to the top of a Low Credenza to support a worksurface.

View Pricing


The Reconfigurable Low Credenza-to-Worksurface Support mounts to the underside of a worksurface and wraps into the open section of a credenza so that screws are affixed to the interior of the credenza. This allows for reconfiguration without damaging the top of storage unit.

View Pricing


The Storage-to-Panel Bracket connects District Storage to the Leverage panel frame, providing panel support.

View Pricing


The Mini Leg is used in place of the Low Credenza to Worksurface Support (UNPCWN) when panel wall support is not required.

View Pricing


The Wire Tray provides a conduit and support for wires between the panel and the back of the worksurface.

View Pricing


The Modesty Panel provides seated privacy to semi-supported worksurfaces and has an integral wire management tray for easy wire flow and increased worksurface stability.

View Pricing


The Desk Edge Screen – Glass attaches to the worksurface to provide space division and territorial desktop privacy.

View Pricing


The Desk Edge Screen – Full-Height Glass attaches to the worksurface to provide space division and territorial desktop privacy.

View Pricing


The Desk Top Mounted Screen is mounted to a worksurface to provide privacy and space division.

View Pricing


The Fixed-Height Thin Panel Mount Bracket mounts to the mid rail of Lyft Standard and Segmented Thin Panels, providing worksurface support.

View Pricing


The Adjustable-Height Thin Panel Mount Bracket mounts to Lyft Standard and Segmented Thin Panels to provide worksurface support with a height-adjustment range of 26" to 32".

View Pricing


The End Gable connects to Lyft Thin Panels and worksurfaces to provide structural support at the end of a worksurface run.

View Pricing


The Worksurface Supporting Pedestal Kit, in combination with a Pedestal, provides structural support when mounted to worksurfaces and Lyft Thin Panels.

View Pricing


The Overhead Cabinet is a panel-mounted, on- or off-module lockable storage unit.

View Pricing


The Overhead Upmount is a panel-mounted on-module lockable storage unit for lower height panels.

View Pricing


The Overhead Upmount Retrofit Kit allows an existing Leverage Overhead Cabinet (KSF) to be upmounted on module on a Leverage panel.

View Pricing


The Centermount Overhead Storage Bracket is used to mount District Overheads to Leverage Panels.

View Pricing


Shelves provide panel-mounted, on-module open storage in the workstation.

View Pricing


The Suspension Shelf provides panel-mounted on-module or semi off-module open storage.

View Pricing


The reversible Hang-On Whiteboard serves as an erasable message board and is equipped with a marker tray.

View Pricing


The Accessory Rail is designed to support Personal Organizers (PAX) and facilitate organization of the workspace.

View Pricing


The Table Rail is designed to supplement Leverage worksurfaces by providing a rail to which other table accessories can be mounted thus facilitating workspace organization.

View Pricing


The Table Screen provides a table-width tackable surface and visual privacy when mounted to a Table Rail.

View Pricing


The Shelf Divider separates books, paper, binders and other items.

View Pricing


Each set of cores include a lock & core and 2 identical keys.

View Pricing


Touch-Up Kits are used for touching up minor scratches and chips.

View Pricing


The Pedestal provides storage below the worksurface and is available in four drawer configurations.

View Pricing


The Stretch Pedestal provides freestanding filing storage beneath the worksurface.

View Pricing


The Mobile Pedestal with Seat provides personal storage and temporary casual seating within a workstation.

View Pricing


Mobile Pedestals are equipped with large casters that allow for easy movement within a workstation.

View Pricing


The Mobile Pedestal with Cushion provides personal storage and temporary casual seating within a workstation.

View Pricing


The Front Open Locker provides a flexible solution for combining filing, coat storage and binder storage.

View Pricing


The Side Open Locker provides a flexible solution for combining filing, coat storage.

View Pricing


Pedestal Accessories are organizational tools for use in Pedestals (KD).

View Pricing


Stretch Pedestal Accessories are organizational tools for use in Stretch Pedestals (KDE).

View Pricing


Casters can be applied to pedestals to create mobile storage. The Counterweight can be applied to pedestals to prevent tipping.

View Pricing


The Universal Light is magnetically mounted along the underside of overhead storage and provides task lighting for the worksurface.

View Pricing


The Slim Profile Utility Light is clip mounted to the underside of the Overhead Cabinet (KSF) and Shelf (KSS). It provides moveable side-to-side task lighting for the worksurface.

View Pricing


The Base Feed is hard-wired to the building power supply. It feeds power into the panel.

View Pricing


The Split Base Feed is hard-wired to the building power supply in two places. It feeds power into the panel.

View Pricing


The Communications Base Feed offers a means to feed communication cables into the panels via the base.

View Pricing


The Ceiling Feed includes a junction box to connect to building supply and routes power into the panel from the ceiling.

View Pricing


The Power Pole routes power and communication cables to the top of the panel.

View Pricing


The End of Run Power Pole houses the ceiling feed end of panel run entry points. A pole divider for separating the ceiling feed from communications and data cables is provided.

View Pricing


The Power Harness permits two or more power boxes to be connected to a single power source.

View Pricing


The Distribution Block routes power in two or three directions for distribution between two to three adjacent panels without connecting to outlets.

View Pricing


The Power Box is a module that mounts to a panel rail to allow mounting of receptacles.

View Pricing


The Receptacle Outlet a single duplex that slides onto the power box to provide power.

View Pricing


Outlet Cover Cap covers any unused opening in the Power/Communications Element.

View Pricing


Power Bezel converts unused openings in the Power/Communications Element to accommodate power outlets.

View Pricing


Communications Bezel converts unused openings in the Power/Communications Element to accommodate communication outlets.

View Pricing


The Data Extender Plate is placed over a communication opening to provide extended depth for data jacks which may be required in some applications. Consult your data cabling supplier for clearance requirements.

View Pricing


The Chicago Base Feed delivers power to a panel wall at base level.

View Pricing


The Chicago Ceiling Feed routes power from the ceiling into panel walls.

View Pricing


The Chicago Power Box provides access to power at various panel heights, includes one to four receptacles depending on application selected.

View Pricing


Compatibility Power Harness is used to connect harnesses from the old Leverage electrics to harnesses from the new Leverage electrics, allowing both systems to be used in the same configuration.

View Pricing


Base Cable Clips attach to the base rail of Lyft Thin Panels to support casual wire routing.

View Pricing


Outlet Box provides access to power at worksurface height. Outlet boxes can be mounted onto a Panel (accessible through an Access Door or an Element), or mounted to the edge of a desk or table.

View Pricing


Interconnecting Power Cable routes power between Outlet Boxes in panel access areas and also carries power through the adjacent panel.

View Pricing


The Input Power Cable brings power from the building to the panel. It can be installed in the base opening of the panel to feed power up to the panel raceway or worksurface level. It can also be brought down from the ceiling to the workstation via a power plate.

View Pricing


The Voice & Data Box is designed to bring access to communications and data to the user.

View Pricing


The Voice & Data Outlets are inserted into the Voice & Data Box (VVD).

View Pricing


The Distribution Block redirects power distribution. The Cover Cap is a safety cover for Outlet Boxes and Distribution Blocks. The Desk-Mounting Clips attach an Outlet Box to a desk or worksurface.

View Pricing


Leverage Outlet Box Panel Mount Brackets attach to the Outlet Box (VED) or the Voice & Data Box (VVD) to the panel.

View Pricing


Leverage Outlet Box Bazel is used to provide a bezel for the Outlet Box (VED) when mounted to a Leverage Element.

View Pricing


International Communications Mounting Kit permits mounting of communications outlets in a standard fabric element.

View Pricing


Power Conservation system provides an automatically turn off to items like task lights, monitors, personal heaters and fans and other non-essential user equipment when they are not in use.

View Pricing


The CALA Power Modules provides one or two duplexes embedded to the Leverage panel. CALA power & data can be specified on a single side or back to back in the panel.

View Pricing


The Power In feed cable brings power from the building to the panel. It can be installed in the base opening of the panel to feed power up to the CALA power module. It can also be brought down from the ceiling to the workstation.

View Pricing


The Jumper Power Harness routes power between CALA Power Modules in panel access areas and also carries power through the adjacent pane

View Pricing


1 CALA power station, selected power data or USB option.

View Pricing